How to Configure Your Camera's Wi-Fi

Out of the box, your camera broadcasts its own network called Athlee-Streaming. This is the Mobile Athlee Wi-Fi, the default mode. You can change it to a name you'll recognise, such as Athlee-YourClub, and set your own password. This guide walks you through it and shows you how to add more cameras to the same network. Mobile Athlee Wi-Fi is ideal for one or two cameras and portable use. If you're running three or more cameras, use Pool Wi-Fi instead.

Step 1: Reset the camera

Changing the Wi-Fi name or password requires a reset first. Hold the power button for 15 seconds until the LED blinks, then wait 2-3 minutes for the camera to reappear as Athlee-XXXX. Full instructions: How to Reset Your Athlee Camera.

Step 2: Connect your iPad to the camera

On your iPad, open Settings → Wi-Fi and connect to Athlee-XXXX using the password 12345678. If you have multiple cameras and see more than one Athlee-XXXX, just connect to any one of them.

You may also see a network called CamCom-XXXX. Don't connect to it; it's used for communication between cameras and won't give you a working stream. Always connect to Athlee-XXXX.

Step 3: Set your name and password

1. Open the Athlee Coach app.
2. Go to Menu → Settings → Wi-Fi Management.
3. The app will guide you through entering a new network name (for example, Athlee-YourClub) and a password of your choice (minimum 8 characters).
4. Tap Save and wait about 5 minutes while the camera reboots.

Step 4: Reconnect and verify

On your iPad, return to Settings → Wi-Fi, connect to your new network with your new password, then reopen the Athlee Coach app. Your camera is now configured and ready to use.

Adding more cameras

If you have more than one camera, you can add them to the same network automatically, with no need to configure each one by hand. When a configured camera detects a reset camera, it automatically connects to that camera and adds it to its Wi-Fi network. Here is how to do it:

1. Leave your configured camera turned on.
2. Reset the next camera (hold the power button for 15 seconds) and power it on.
3. Wait 3-5 minutes. The configured camera finds the reset camera and sets it up automatically.
4. When Athlee-XXXX disappears from your iPad's Wi-Fi list, the new camera has joined.
5. Repeat for any remaining cameras.

Related: How Athlee Wi-Fi Works · How to Connect Your Cameras to Pool Wi-Fi